เตาอบลมร้อน Drier For Car Furniture And all Dry things

Dry Temp  = 60-150 C

Combustion temperature = 300-450 C

Drying Cycle = 6-15 minute

Burner = Kromchroder 150,000 kcal/hr

พลังงานแก๊ส ที่ใช้อยู่ในปัจจุบัน = 48 kg ต่อ 3.5 วันทำงาน (LPG)

This Project is for the Automotive parts.	We installed the heating chamber L=1.6 Meter
Also the Spray machine with ventilator	After dry has the Blow air booth with Filter machine
the concept of Drying is to Heat the air and feeding inside the Drier Above and Below the product.	Heating Chamber Generate the hot air to the Hotair Blower.
There are 2 Automatic Adjustment Servomotor. Allow us to be able to control 2 Zone of temperature.	Entrance the kiln we installed suction system 1 Above and 2 Below the product.
The drier was 14 meter	The conveyor able to loaded 300 Kg/Sqm.
Firing Chamber with Combustion Blower Burner.	Auto Regulation system for Burner Max/Min Gas.
Installed with Microprocessor Flame Control. To check that the burner is Running or Stop. If not Running the gas will cut off and Alarm to the operator For fix the problem.	the Hot Air Blower was Hight Temperature resistance.
The Hot air Feeding to the above and below the product. To avoid over temp at the product.	Exhaust Blower at the entrance of the Drier.
Production Running of our customer.	Loading to the kiln at 2 meter/min
Our happy customer with Mr. Charlie	Inside the Drier at 70 C
Our Mechanical Engineer and Electrical Engineer.	Seem he was tired.
But after work was done we were happy.	This is me Mr. charlie
	อุณหภูมิห้องเผาไหม้ 159 องศา ในห้องอบตั้งไว้ 67 องศา ห้องเผาไหม้อุณหภูมิต่ำทำให้ประหยัดแก๊ส
Start the burner.
	It's ok Boss Burner work properly (he said)
Aluminium Jacket Pipe cover need to seal with Silicone.
here the First Product that come out.	Blow Air cleaning.
Plastive with Fur.	Nice and smoothly product.
Aluminium Cover installation.	Spend alot of worker and time.
But to prevent the heat loss along the pipe.	we need these insulation for Efficiancy  and prettyness.
Insulation for the hot air pipe with Rockwool.	Firing chamber with Ceramic Fiber 1260 C Insulation.
Servomotor Control each Zone.	Servomotor Diameter 200 mm